Brushed Brass Dish Wall Sconce
Brushed Brass Dish Wall Sconce
Made for you in Fes
Hand-hammered after you order: about 2 weeks in the workshop, then 5–8 business days to you.
Final sale once hammering starts, unless damaged or not as described. Cancel free within 48 hours. Unsure of fit? Send us your measurements first.
Handmade in FesHammered by Moroccan artisans
Talk to a person+1 762-920-7992
Bespoke sizesMade to your measurements
Secure checkoutEncrypted payment
Details
A wall sconce built around a large, flat round disc of solid brass, about 12 inches across, with a brushed finish that shows a fine circular grain. The disc stands just off the wall on a round brass canopy. A slim brass tube curves over the top edge of the disc like a hook and drops down to a plain brushed brass cylinder socket in front of the centre, so a globe bulb sits against the disc and the brass reflects its warm light back into the room.
Use a pair either side of a bathroom mirror, or one in a hallway, stairwell or living room. The brushed finish has a soft, low-shine look that shows fewer marks than polished brass.
Details
- Material: solid brass
- Finish: brushed brass
- Style: round 12 in dish backplate with a hooked arm and bare bulb
- Mounting: wall mounted with a concealed mounting bracket
- Included: sconce with concealed mounting bracket
- Socket: E26/E27
- Bulb not included
- Wiring: contact us for wiring details
- Size and shape can be customised on request
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Disc diameter | 12 in | 30 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Dust the brushed brass with a soft dry cloth. Avoid abrasive pads and harsh cleaners. See our Care and Patina Guide for more.
How it compares: Our Hammered Brass Oval Plate Wall Sconce also puts a bare bulb in front of a brass plate, but uses a tall, wavy oval plate in hand-hammered unlacquered brass with a short straight socket. This one is a flat, round brushed disc with a slim hooked arm.
See more of our handmade lighting.
Size and hanging guide
Choosing a size. Pick the diameter in the selector above. As a rough guide, an 8 to 12 in shade suits a small island, a bedside or a breakfast nook, 14 to 18 in suits a standard island or dining table, and 22 in works as a single centrepiece over a large table.
- Kitchen islands: hang two or three pendants evenly spaced, with the bottom of each shade about 30 to 36 in above the counter.
- Dining tables: hang the bottom of the shade about 30 to 34 in above the tabletop, and choose a shade about half to two thirds of the table width.
- Cord length: measure from the ceiling to where you want the bottom of the shade, then choose the next cord length up.
Wiring and bulbs. Socket type and bulb details are listed in each product description. Installation by a licensed electrician is recommended.
Not sure which size or cord length? Send us your ceiling height and your table or island size and we will suggest one.
Craftsmanship
Every shade is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks and patina are what make each piece one of a kind.
Materials and care
Solid copper or brass. Raw finishes deepen into a natural patina over time, while oxidized and bronze finishes are made to look aged from the start. Switch the light off and let the shade cool, then dust it with a soft dry cloth. Avoid harsh cleaners and abrasive pads. Read our Care and Patina Guide.
Shipping and returns
Ready to ship pieces leave our New Jersey warehouse within 2 business days. Made to order pieces take about 2 weeks in the workshop in Fes, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the colour change over time?
Raw copper and brass develop a living patina that deepens and warms. Oxidized and bronze finishes already look aged and change more slowly.
Can you make a custom size or cord length?
Yes. Contact us with what you need and we will make it to order in Fes.
Is a bulb included?
Bulb and socket details are in each product description. Unless it says otherwise, the bulb is not included.
Do I need an electrician?
Installation by a licensed electrician is recommended for ceiling lights.
Where does it ship from?
Ready to ship pieces leave our New Jersey warehouse. The rest are hand-hammered to order in Fes, about 2 weeks in the workshop. The delivery note beside Add to cart shows which applies.
Loved in kitchens and bathrooms
Real reviews from buyers of our hand-hammered brass and copper pieces on Etsy.