40 Inch Hammered Brass Undermount Kitchen Sink
40 Inch Hammered Brass Undermount Kitchen Sink
Made for you in Fes
Hand-hammered after you order: 2–4 weeks in the workshop, then 5–8 business days to you.
Final sale once hammering starts, unless it arrives damaged or not as described. Cancel free within 48 hours. Unsure about fit? Send us your measurements and we will check before you order.
Ships to the contiguous US. Shipping is calculated at checkout. Shipping Returns
Handmade in FesHammered by Moroccan artisans
Talk to a person+1 762-920-7992
Bespoke sizesMade to your measurements
Secure checkoutEncrypted payment
Details
A long, single-basin rectangular kitchen sink in solid unlacquered brass, hand-hammered inside and out with a fine, dense dimpled texture. It has straight walls, a narrow flat rim and crisp square inside corners with sealed seams, in a bright yellow brass tone. An unlacquered brass basket strainer drain is included.
This undermount sink is installed beneath a stone or solid-surface countertop, so the counter edge runs cleanly over the rim and crumbs wipe straight into the basin. It is made to order and shaped by hand, so small variations in tone and texture are part of its character.
Details
- Material: solid brass, unlacquered
- Finish: fine hand-hammered, bright brass
- Shape: long rectangle, single basin, square inside corners
- Installation: undermount kitchen sink
- Size options: one size, about 40 in long as listed by the maker; full dimensions available on request
- Drain included: 3-1/2 Inch Unlacquered Brass Kitchen Sink Basket Strainer
- Handcrafted to order in Morocco
- Each piece is unique; measurements are approximate
Which size should I choose?
At around 40 inches long, this is a statement sink for a large kitchen or a long island, with room for big pots and sheet pans. It needs a generous sink base cabinet, so contact us for the exact inside and outside measurements before planning your cabinetry and countertop cutout.
Dimensions
| Inside length (inches) | Inside length (cm) |
|---|---|
| About 40 in (as listed); width on request | About 102 cm; width on request |
Sizes are the inside of the basin, excluding the rim. Measurements are approximate because each sink is shaped by hand.
Care and patina
Unlacquered brass is a living finish: it mellows from bright gold toward a warm, softer patina with use. Rinse and dry after use and wash with mild soap. Avoid bleach and abrasive pads. A brass polish brings back the shine whenever you like. See our Care and Patina Guide for the full routine.
Made to order
Every sink is handcrafted when you order it. Custom sizes are available on request: contact us with your countertop cutout measurements.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.
Loved in kitchens and bathrooms
Real reviews from buyers of our hand-hammered brass and copper pieces on Etsy.