Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This unlacquered brass built-in shower system with tub filler gives you a rain shower head on a wall arm and a curved wall tub spout, both run from one round trim plate. The single lever controls flow and temperature, and a small knob diverts water from the shower head to the tub filler.
It is made for a tub and shower combination on tile or plaster, with the valve hidden in the wall. Choose a rose, square or round shower head. The brass is unlacquered and will develop a natural patina.
Details
- Material: solid brass
- Finish: polished unlacquered brass; develops a patina over time
- Style: traditional built-in shower and tub set
- Installation: built-in, valve in the wall; only trims visible
- Outlets: 2 (shower head and tub filler)
- Handles: single lever for flow and temperature, plus a small diverter
- Included per the seller photos and drawing: shower head with wall arm, in-wall mixing valve body, round valve trim with lever and diverter, wall tub spout
- Shower head options: Rose, Square or Round
- Connections per the seller technical drawing: shower arm 1/2 inch NPT male, valve inlets and outlets 1/2 inch BSP female
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Shower head diameter | 8 | 20 |
| Shower head height | 4 | 10 |
| Shower arm reach from wall | 18.5 | 47 |
| Arm drop to head face | 7.5 | 19 |
| Valve trim plate diameter | 7 | 18 |
| Tub spout reach | 8.83 | 22 |
| Tub spout drop | 3.95 | 10 |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the brass with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it darkens gradually and builds a warm patina where it is touched most. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Is the valve included?
Yes. The seller technical drawing shows the in-wall mixing valve body with its round trim, lever and diverter. Contact us if your plumber needs the rough-in drawing.
Does it work with US plumbing?
The shower arm has a 1/2 inch NPT male thread and the valve uses 1/2 inch BSP female connections, so your plumber may need BSP to NPT adapters. Contact us with any questions.
Is it hot and cold?
Yes. The single lever sets flow and temperature, and the small diverter sends water to the shower head or the tub filler.
See all our handmade brass shower systems.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.



