Unlacquered brass exposed shower system with bell head, riser handheld and cross handle mixer on a light background

Unlacquered Brass Exposed Rain Shower System with Handheld

Rose
$500
Skip to product information
Unlacquered brass exposed shower system with bell head, riser handheld and cross handle mixer on a light background

Unlacquered Brass Exposed Rain Shower System with Handheld

$500
Shower Head

View store information

Unlacquered Brass Exposed Rain Shower System with Handheld

Rose

Made for you in Fes

Hand-hammered after you order: 2 weeks in the workshop, then 5–8 business days to you.

30-day returns on standard sizes. Custom sizes are final sale once hammering starts, unless they arrive damaged or not as described. You can cancel any order within 48 hours. Unsure about fit? Send us your measurements and we will check before you order.

Handmade in FesBy Moroccan artisans

Talk to a person+1 762-920-7992

Bespoke sizesMade to your measurements

Secure checkoutEncrypted payment

Before you order

The details

Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.

Overview

This unlacquered brass exposed shower system with handheld runs one straight riser up the wall from a two cross handle bar mixer and turns at the top into a short arm with a rain shower head. A slim traditional handheld shower clips into a holder on the riser and connects back to the mixer with a flexible brass hose, while a small diverter on top of the mixer sends the water to the head or the handheld.

Every pipe stays on show, so it suits a vintage or farmhouse bathroom on tile or plaster, and the mixer itself sits on the wall surface. Choose the stepped bell Rose head or the slim Square rain head. The polished brass is unlacquered and will build a living patina with use.

Details

  • Material: solid brass
  • Finish: polished unlacquered brass; develops a patina over time
  • Style: vintage exposed shower system
  • Mounting: wall mounted, exposed pipework; wall bar mixer with 2 inlets
  • Outlets: 2 (rain shower head and handheld) with a diverter on the mixer
  • Handles: 2 four-arm cross handles, hot and cold
  • Cartridges: standard 1/2 inch ceramic cartridges, as stated by the maker
  • Connection: made for US plumbing; the maker lists 1/2 inch NPT
  • Included per the maker photos: bar mixer with cross handles and diverter, riser with wall bracket and arm, rain shower head, handheld shower with holder on the riser, flexible brass hose
  • Shower head options: Rose (stepped bell) or Square
  • Installation by a licensed plumber is recommended
  • Free shipping
  • Handcrafted in Morocco
  • Each piece is unique; measurements are approximate

Care and patina

Wipe the brass with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it darkens gradually and builds a warm patina where it is touched most. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.

Frequently asked questions

Is the valve included?
Yes. The exposed bar mixer with two cross handles and the diverter is the valve, and it comes with the riser, head, handheld and hose.

Does it work with US plumbing?
The maker states it is made for 1/2 inch NPT plumbing with standard 1/2 inch ceramic cartridges. The listing does not give dimensions, so contact us for the inlet centres before your plumber sets the supplies.

Is it hot and cold?
Yes. The two cross handles set hot and cold, and the diverter switches between the rain head and the handheld.

See all our handmade brass shower systems.

Size and install guide

Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.

  • Farmhouse sinks: check the base cabinet width and the front apron height before you order.
  • Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
  • Bar and prep sinks: undermount and drop in installation are both possible.

Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.

Not sure it will fit? Send us your measurements and we will confirm before you order.

Craftsmanship

Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.

Materials and care

Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.

Shipping and returns

In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.

Frequently asked questions

Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.

Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.

Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.

Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.

Loved in kitchens and bathrooms

Real reviews from buyers of our hand-hammered brass and copper pieces, across every platform we sell on.

More from the workshop