Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This unlacquered brass exposed shower system with tub spout is built around a wall bar mixer with two cross handles and a short spout underneath. One straight riser climbs about five feet from the mixer to a horizontal arm and a rain shower head, held to the wall by a single round bracket.
Mount it over a bathtub for a classic tub and shower combination with all the pipework on show. A small lever on the mixer switches the water between the shower head and the tub spout. The brass is unlacquered and will develop a natural patina.
Details
- Material: solid brass
- Finish: polished unlacquered brass; develops a patina over time
- Style: vintage exposed shower and tub set
- Mounting: wall mounted, exposed pipework
- Outlets: 2 (rain shower head and tub spout) with a diverter lever on the mixer
- Handles: 2 four-arm cross handles, hot and cold
- Pipe height: 59 inches; width: 16.5 inches
- Included per the maker photos: bar mixer with cross handles and tub spout, riser with wall bracket, horizontal arm, rain shower head
- Shower head options: Rose (stepped bell), Square or Round
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Pipe height | 59 | 150 |
| Width (arm reach) | 16.5 | 42 |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the brass with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it darkens gradually and builds a warm patina where it is touched most. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Is the valve included?
Yes. The exposed bar mixer with two cross handles and the tub spout is part of the set, with the riser, arm and rain head.
Does it have a handheld?
No. This set has an overhead rain shower head and a tub spout, switched by the lever on the mixer.
Does it work with US plumbing?
The listing does not state the thread size or inlet centres. Contact us before your plumber sets the supplies.
See all our handmade brass shower systems.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.



