Unlacquered Brass Push-Up Sink Drain with Overflow
Unlacquered Brass Push-Up Sink Drain with Overflow
Made for you in Fes
Hand-hammered after you order: about 2 weeks in the workshop, then 5–8 business days to you.
Final sale once hammering starts, unless damaged or not as described. Cancel free within 48 hours. Unsure of fit? Send us your measurements first.
Handmade in FesHammered by Moroccan artisans
Talk to a person+1 762-920-7992
Bespoke sizesMade to your measurements
Secure checkoutEncrypted payment
Details
A push pop-up bathroom sink drain in solid unlacquered brass, with a smooth low domed cap, a black rubber seal and a slim round flange. Below the flange, the solid brass body has a rectangular overflow slot and a threaded lower section with a black rubber washer.
Made for basins with an overflow hole: the slot in the body lets the overflow vent into the drain, so the sink empties faster. Press the cap to close it and press again to open. Unlacquered brass starts with a soft shine and slowly darkens to a warm patina, matching unlacquered faucets and handmade brass sinks.
Details
- Material: solid brass
- Finish: unlacquered brass, develops a natural patina over time
- Style: push pop-up (click) drain with smooth domed cap
- Overflow: yes, with an overflow slot in the drain body
- Fits sink drain holes from about 1.64 to 1.9 in (4.2 to 4.8 cm)
- Pack options: 1, 2 or 3 drains
- Installation: make sure the rubber gaskets sit in the right position; some sinks may need standard US drain parts to finish the connection
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Cap width | 2.6 in | 6.6 cm |
| Height | 3.06 in | 7.8 cm |
| Fits sink drain hole | 1.64 to 1.9 in | 4.2 to 4.8 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Rinse and wipe dry after use to limit water spots. Unlacquered brass is a living finish: polish it to keep it bright, or let it darken naturally. Avoid harsh cleaners and abrasive pads. See our Care and Patina Guide for the full routine.
Frequently asked questions
Will it fit my sink?
It fits sink drain holes from about 1.64 to 1.9 in (4.2 to 4.8 cm) and is made for basins that have an overflow hole.
Do I need any other parts?
Some sinks need standard US drain parts to finish the connection. Contact us with your sink details and we will help you check.
Can I buy more than one?
Yes. Choose a pack of 1, 2 or 3 drains, which is handy for double vanities.
See all our brass sink drains, and pair it with our handmade bathroom and vessel sinks and brass sink accessories.
Size and install guide
Choosing a size. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the piece for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every piece is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
Ready to ship pieces leave our New Jersey warehouse within 2 business days. Made to order pieces take about 2 weeks in the workshop, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke pieces are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Ready to ship pieces leave our New Jersey warehouse. The rest are hand-hammered to order in Fes, about 2 weeks in the workshop. The delivery note beside Add to cart shows which applies.
Loved in kitchens and bathrooms
Real reviews from buyers of our hand-hammered brass and copper pieces on Etsy.