Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This unlacquered brass rain shower system with handheld and cross handles reaches 17.5 inches out from the wall on a straight arm before turning down into a stepped bell rain shower head. A slim traditional handheld rests on a round wall outlet, and three separate round trims, two cross handles with a lever diverter in the middle, run the shower.
It is a classic two-outlet set for a walk-in shower, with the long arm placing the rain head well away from the wall. The polished brass is unlacquered and will develop a natural patina.
Details
- Material: solid brass
- Finish: polished unlacquered brass; develops a patina over time
- Style: traditional built-in dual shower system
- Mounting: wall mounted, built-in (valves inside the wall, trims show)
- Outlets: 2 (overhead rain shower and handheld)
- Handles: 2 cross handles and a centre lever diverter, 3 separate round trims
- Shower arm reach: 17.5 inches; arm drop to head face: 8 inches
- Included per the maker photos: wall arm with bell rain head, handheld shower with flexible hose and wall outlet holder, 3 valve trims
- Shower head options: Rose (stepped bell), Square or Round
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Shower arm reach | 17.5 | 44 |
| Arm drop to head face | 8 | 20 |
| Wall to front of head | 21.25 | 54 |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the brass with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it darkens gradually and warms up most on the handles. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
How far does the rain head sit from the wall?
The arm reaches about 17.5 inches (44 cm), and the front of the head sits about 21.25 inches (54 cm) from the wall.
Is the valve included?
The set is shown with its three wall trims. Contact us to confirm the in-wall valve bodies that ship with your order before your plumber roughs in.
Does it work with US plumbing?
The listing does not state the thread size. Contact us before your plumber sets the supplies.
See all our handmade brass shower systems.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.



