Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This unlacquered brass shower system with tub spout uses three separate wall trims: two cross handles for hot and cold with a small lever between them that diverts water from the shower head to the tub spout. The bell-shaped rain shower head hangs from a long wall arm, and a curved spout fills the tub below.
It is a built-in set for a tub and shower combination on tile or plaster, with only the brass trims on show. Choose a rose, square or round shower head. The brass is unlacquered and will build a living patina.
Details
- Material: solid brass
- Finish: polished unlacquered brass; develops a patina over time
- Style: traditional built-in shower and tub set
- Installation: built-in; only trims visible
- Outlets: shower head and tub spout
- Handles: 2 cross handles (hot and cold) and a centre lever diverter, 3 separate trims
- Handle centres: 8 inches hot to cold; overall valve width 10.7 inches
- Connections per the seller technical drawing: valves G 1/2 inch female, shower arm and tub spout 1/2 inch NPT male
- Wall depth for the valves: 2.20 to 3.00 inches
- Included per the seller photos and drawing: shower head with wall arm, 3 in-wall valve bodies with trims (2 cross handles and a centre diverter), wall tub spout
- Shower head options: Rose, Square or Round
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Shower head diameter | 8 | 20 |
| Shower head height | 4 | 10 |
| Shower arm reach from wall | 18.9 | 48 |
| Arm drop to head face | 7.5 | 19 |
| Hot and cold handle centres | 8 | 20 |
| Overall valve width | 10.7 | 27 |
| Tub spout reach | 8.83 | 22 |
| Tub spout drop | 3.95 | 10 |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the brass with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it darkens gradually and builds a warm patina where it is touched most. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Is the valve included?
Yes. The seller technical drawing shows the three in-wall valve bodies behind the cross handles and the centre diverter. Contact us if your plumber needs the rough-in drawing.
Is it hot and cold?
Yes. The two cross handles set hot and cold, and the centre lever switches water between the shower head and the tub spout.
Does it work with US plumbing?
The shower arm and tub spout have 1/2 inch NPT male threads, and the valves use G 1/2 inch female connections, so your plumber may need adapters for the valves. Contact us with any questions.
See all our handmade brass shower systems.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.



