A copper farmhouse sink usually costs between $400 and $3,000 or more. According to BestReviews, basic models run about $400 to $1,000, mid-range options about $700 to $1,500, and the best sinks start around $1,500 and can cost double that. Our own hand-hammered Fes Farmhouse Sink is $1,450 to $1,850 depending on width. Where a sink lands in that range comes down to size, how much copper goes into it, whether it is made by hand, and what is included in the box.
Below, we break down what you are actually paying for, what costs extra after checkout, and how to tell a fair price from a cheap one.
In this article
- What price ranges should you expect?
- What are you paying for in a handmade copper sink?
- How much does size change the price?
- What costs extra beyond the sink itself?
- Is a copper farmhouse sink cheaper than brass?
- Why are some copper farmhouse sinks so cheap?
- How do you protect what you paid for?
- Frequently asked questions
What price ranges should you expect for a copper farmhouse sink?
Most copper farmhouse sinks fall into three broad tiers. The figures below come from BestReviews' buying guide, which names size, configuration (single or double basin), copper purity and copper gauge as the main drivers of price.
| Tier | Typical price | What to expect |
|---|---|---|
| Basic | $400 to $1,000 | Smaller sizes, simpler construction, fewer extras included |
| Mid-range | $700 to $1,500 | Wider choice of sizes and finishes |
| Top tier | $1,500 to $3,000+ | Larger sizes, heavier copper, handwork and custom options |
The tiers overlap because no two makers price the same way. Use them as a map, then judge each sink on what it actually offers.
What are you paying for in a handmade copper sink?
Today, the biggest share of a copper sink's price is the metal itself and the cost of getting it to you. Copper prices hit record highs this year: Benchmark Minerals reported LME cash copper above $13,000 per tonne in January 2026. International shipping has also become more expensive, and a farmhouse sink is a large, heavy piece to move across an ocean. Skilled handwork is the other big part of the price. Our Fes Farmhouse Sink is hand-raised over an open flame and hammered by artisans in Fes, Morocco. Every dimple on the apron is a single hammer strike, which is why no two sinks look exactly alike.
Here is what that price covers:
- Solid copper. The sink is formed from solid copper, not a copper coating over another metal.
- Hand hammering. Skilled handwork shapes the basin and the apron front, strike by strike.
- No lacquer. The copper is left unlacquered, so it develops a natural, living patina with use instead of a coating that can wear unevenly.
- Made to order. Each sink is made when you order it, in the size and finish you choose.
- Insured shipping. Every sink ships fully insured.
Solid unlacquered copper, hand-raised and hammered in Fes. Grid and drain included.
How much does size change the price of a copper farmhouse sink?
Size is the single biggest price lever you control. A bigger basin uses more copper, and with copper at record prices, that adds up quickly. On the Fes, each step up in basin width adds $200, and the finish you pick (polished copper or aged copper patina) does not change the price.
| Fes inside basin width | Polished Copper | Aged Copper Patina |
|---|---|---|
| 30 inch | $1,450 | $1,450 |
| 33 inch | $1,650 | $1,650 |
| 36 inch | $1,850 | $1,850 |
Sizes are the inside of the basin, excluding the rim. Before you pay for the larger size, measure your sink base cabinet. A farmhouse sink has to fit the cabinet it sits in, and buying more width than the cabinet allows means paying for cabinet work too.
What costs extra beyond the sink itself?
The sticker price is rarely the whole bill. Plan for these line items:
- Installation. HomeAdvisor reports most homeowners spend $250 to $700 to install a sink. A farmhouse sink can cost more if the cabinet front needs to be cut down or the sink needs extra support, so get a quote from your installer.
- Countertop work. Undermount sinks need a finished cutout in the countertop, which your fabricator will price separately.
- Faucet. Faucets are sold separately, and finishes that suit copper vary widely in price.
- Drain and grid. Some sinks leave these out. The Fes includes a protective flat-bottom grid and a drain assembly in the price, which saves you a second order.
Is a copper farmhouse sink cheaper than brass?
In our own range, yes. The Marrakech, our brass farmhouse sink, is made by the same artisan network in Fes and comes in the same three widths, and it costs $200 more than the copper Fes at each size ($1,650 to $2,050). The two sinks also age differently: copper deepens toward a rich brown, while brass moves from golden to amber. If you are still deciding between the metals, our guide to copper vs brass kitchen sinks covers the differences beyond price.
Solid unlacquered brass that deepens into a warm amber patina. Grid and drain included.
Why are some copper farmhouse sinks so cheap?
A low price usually means something was saved on one of the factors that drive cost. When a copper farmhouse sink is priced well below the basic tier, ask the seller:
- Is it solid copper? Purity is one of the main price drivers, so ask what the sink is made of.
- How heavy is the copper? Lighter copper uses less metal and costs less. Ask the seller to tell you plainly.
- Is it lacquered? A clear coat can hide the copper's natural color change for a while, but it changes how the sink ages and how you care for it.
- What is included? A low price without a drain or grid can end up close to a higher price that includes both.
Our list of 9 questions to ask before buying a copper or brass sink goes deeper on each of these.
If a full farmhouse sink is more than your project needs, a smaller undermount copper sink for an island, bar or prep area gives you the same hand-hammered copper at a lower price.
Square, solid unlacquered copper in five sizes from 13 x 13 in to 21 x 21 in, with a matching drain.
How do you protect what you paid for?
The care routine for unlacquered copper is simple, and it is what keeps the sink looking like it was worth the money. Rinse and wipe the sink dry after use, wash with mild soap, and avoid bleach and abrasive pads. Let the patina develop. It is the copper's natural finish, not damage. Our Care and Patina Guide has the full routine, and our step-by-step guide on how to clean a copper sink covers everyday cleaning.
Frequently asked questions
How much does a copper farmhouse sink cost on average?
Most copper farmhouse sinks cost $400 to $1,500, and premium handmade sinks start around $1,500 and can reach $3,000 or more. Our Fes Farmhouse Sink is $1,450 with a 30 inch basin and $1,850 with a 36 inch basin.
Is a copper farmhouse sink worth the money?
It is worth it if you want a sink that develops a living patina and carries visible handwork. If you would rather have a finish that never changes, a coated sink or a different metal may suit you better.
Does the finish change the price of the Fes Farmhouse Sink?
No. Polished Copper and Aged Copper Patina cost the same at each size. Only the width changes the price.
How much does it cost to install a copper farmhouse sink?
HomeAdvisor reports most homeowners spend $250 to $700 to install a sink. Farmhouse sinks can cost more when the cabinet needs modifying or extra support, so ask your installer for a quote.
What is included with a Brass & Basin farmhouse sink?
The Fes and Marrakech farmhouse sinks include a protective flat-bottom grid and a drain assembly. Each is made to order and ships fully insured.
Find the farmhouse sink that fits your kitchen
Hand-hammered copper and brass, made to order by artisans in Fes, Morocco.
Shop farmhouse sinks →Every sink ships fully insured.