Aged brass shower set with angled arm, 6 inch head, lever trim and tub spout on a light background

Aged Brass Built-In Shower System with Angled Head and Tub Spout

$400.00
Skip to product information
Aged brass shower set with angled arm, 6 inch head, lever trim and tub spout on a light background

Aged Brass Built-In Shower System with Angled Head and Tub Spout

$400.00

View store information

Aged Brass Built-In Shower System with Angled Head and Tub Spout

Made for you in Fes

Hand-hammered after you order: 2 weeks in the workshop, then 5–8 business days to you.

Final sale once hammering starts, unless it arrives damaged or not as described. Cancel free within 48 hours. Unsure about fit? Send us your measurements and we will check before you order.

Handmade in FesBy Moroccan artisans

Talk to a person+1 762-920-7992

Bespoke sizesMade to your measurements

Secure checkoutEncrypted payment

Before you order

The details

Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.

Overview

This aged brass built-in shower system with angled head and tub spout sets a compact 6 inch shower head on a short angled wall arm above a curved tub spout. A flat round trim plate with a modern cylindrical lever and a small diverter knob switches the water between the head and the spout.

It is a simple two-outlet set for a bath with a shower over it. The brass arrives with a warm, satin, mottled aged look, and because it is unlacquered, the patina keeps deepening with use.

Details

  • Material: solid brass
  • Finish: aged unlacquered brass with a satin, mottled patina
  • Style: built-in concealed shower and tub system
  • Mounting: wall mounted, built-in (valve inside the wall, trim plate shows)
  • Outlets: 2 (overhead shower and tub filler)
  • Handle: single lever on a round trim plate with a separate diverter knob
  • Shower arm reach: 8.5 inches; shower head: 6 inches across; tub spout reach: 8.38 inches
  • Included per the maker photos: angled shower arm with flange, shower head, round trim plate with lever and diverter, curved tub spout
  • Installation by a licensed plumber is recommended
  • Free shipping
  • Handcrafted in Morocco
  • Each piece is unique; measurements are approximate

Dimensions

Measurement Inches cm
Shower arm reach 8.5 22
Shower head diameter 6 15
Tub spout reach 8.38 21

Measurements are approximate because each piece is made by hand.

Care and patina

Wipe the brass with a soft damp cloth and dry it after use. The aged finish is unlacquered, so it keeps reacting with water and hands and grows deeper over time. If you prefer it brighter, a brass polish brings back the shine; avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.

Frequently asked questions

Is there a handheld shower?
No. The two outlets are the angled shower head and the tub spout; the small knob above the lever is the diverter.

Is the valve included?
The set is shown with its round trim plate. Contact us to confirm the in-wall valve that ships with your order before your plumber roughs in.

Does it work with US plumbing?
The listing does not state the thread size. Contact us before your plumber sets the supplies.

See all our handmade brass shower systems.

Size and install guide

Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.

  • Farmhouse sinks: check the base cabinet width and the front apron height before you order.
  • Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
  • Bar and prep sinks: undermount and drop in installation are both possible.

Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.

Not sure it will fit? Send us your measurements and we will confirm before you order.

Craftsmanship

Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.

Materials and care

Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.

Shipping and returns

In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.

Frequently asked questions

Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.

Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.

Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.

Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.

Kind words

Loved in kitchens and bathrooms

Real reviews from buyers of our hand-hammered brass and copper pieces on Etsy.

More from the workshop