Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This aged brass folding pot filler has a double-jointed swing arm made of two straight round tubes linked by round ball knuckles. A wall valve with a forward-facing cross handle sits on a round flange at the inlet, and a second valve with a cross handle on top controls the flow at the spout end.
Fold it flat against the backsplash when you are done, then swing it out over the stove to fill a heavy pot where it sits. The unlacquered brass has an aged brown-gold patina that keeps deepening with steam and use.
Details
- Material: solid brass
- Finish: aged unlacquered brass with a brown-gold patina
- Style: traditional folding pot filler
- Mounting: wall mounted from 1 water inlet with a round wall flange
- Handles: 2 four-arm cross handles, one on the wall valve and one at the spout end
- Arm: double-jointed folding arm with round ball knuckles; the spout end swivels 360 degrees
- Reach: about 10 inches on the upper arm and 8.67 inches on the lower arm
- Cartridges: standard 1/2 inch ceramic cartridges
- Connection: 1/2 inch NPT inlet
- Included: pot filler and installation manual
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Overall height | 7.24 in | 18 cm |
| Upper arm, joint to spout | 10.0 in | 25 cm |
| Lower arm, inlet to joint | 8.67 in | 22 cm |
| Overall width, folded | 12.77 in | 32 cm |
| Gap between the two arms | 2.18 in | 5.5 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe it with a soft damp cloth and dry it after cooking. The brass is unlacquered and already aged, so steam, water and hands keep deepening the brown-gold patina over time. Polish it with a brass cleaner if you ever want a brighter look, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
How is it mounted?
It mounts on one water inlet in the wall above the range. The round flange covers the opening and the arm folds flat against the wall when not in use.
Is it hot and cold?
No. It has one inlet, so it runs from a single supply line, usually cold. The wall valve and the spout valve both open and close that one supply.
Does it work with US plumbing?
The inlet is 1/2 inch NPT and it uses standard 1/2 inch ceramic cartridges, which the seller says are sold in US stores. A plumber should confirm the fit.
See all our handmade brass faucets, and pair it with our handmade kitchen sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.