Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This aged brass folding pot filler starts at a round wall flange with a cross handle valve on top. From there a round tube drops and turns into an L-shaped first arm, meets a round ball knuckle, and a second straight arm swings back to a valve with its own cross handle and a short downward outlet.
The L-shaped first arm sets the spout lower than the inlet, which helps when the water supply sits high on the wall. Swing the arm out over the burner to fill a pot, then fold it back flat. The unlacquered brass is aged to a warm brown-gold and keeps developing patina with use.
Details
- Material: solid brass
- Finish: aged unlacquered brass with a brown-gold patina
- Style: traditional folding pot filler with an L-shaped first arm
- Mounting: wall mounted from 1 water inlet with a round wall flange
- Handles: 2 four-arm cross handles, one at the wall valve and one at the spout end
- Arm: two-piece folding arm joined by a round ball knuckle
- Cartridges: standard 1/2 inch ceramic cartridges
- Connection: designed for 1/2 inch NPT plumbing
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Care and patina
Wipe it with a soft damp cloth and dry it after cooking. The brass is unlacquered and already aged, so steam, water and hands keep deepening the brown-gold patina over time. Polish it with a brass cleaner if you ever want a brighter look, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
How is it mounted?
It mounts on one water inlet in the wall above the range, with a round flange over the opening. The listing gives no arm lengths, so contact us for measurements before you place the inlet.
Is it hot and cold?
No. It has one inlet and runs from a single supply line, usually cold. Both cross handles open and close that one supply.
How is it different from the double-jointed pot filler?
This one has an L-shaped first arm that drops below the inlet before the knuckle joint, so the spout sits lower; our aged brass folding pot filler with cross handles has two straight parallel arms.
See all our handmade brass faucets, and pair it with our handmade kitchen sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.