Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
An antique brass hand towel holder made from a slim solid brass rod with a twisted rope pattern along its whole length. The rod curves into a wide open D shape, finished at the free end with a small knob, and joins a small round wall rosette through a short post and ball.
The finish is a warm, darkened antique brass, close to bronze, with the deepest tone sitting in the grooves of the twist. Because the ring is open at one end, a hand towel slides on from the side, which makes it handy beside a basin, in a powder room or next to the kitchen sink.
Details
- Material: solid brass
- Finish: antique aged brass, warm brownish bronze tone
- Style: open D-shaped towel ring with a twisted rope rod and knob end
- Mounting: wall mounted, two screws through the round rosette
- Included: towel holder and mounting hardware
- Width 8.77 in, height 4.23 in, projection 2.41 in
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| A: Width | 8.77 in | 22 cm |
| B: Height | 4.23 in | 11 cm |
| Projection from wall | 2.41 in | 6.1 cm |
| Wall rosette diameter | 1.96 in | 5.0 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe with a soft dry cloth and keep it free of standing water. The aged finish is part of the look, so skip the brass polish unless you want it bright again; polishing will remove the darker tone. Avoid harsh cleaners and abrasive pads. See our Care and Patina Guide for more.
Frequently asked questions
How do I hang a towel on it?
The ring is open at one end, so a hand towel slides on from the side without threading it through.
How is it mounted?
The small round rosette fixes to the wall with two screws, and the mounting hardware is included.
Will the antique finish change?
It may deepen a little with handling. Avoid brass polish if you want to keep the darker tone, since polishing brightens it.
See all our brass bath accessories, and pair it with our handmade bathroom and vessel sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.