Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
A brass shower shelf cut in an open diamond lattice. The flat grid base has a thin front rim, and a lattice back panel rises behind it with a row of pointed peaks along the top, sloping down at each end. Water runs straight through the openings, so bottles and soap stay dry.
The bright, polished unlacquered brass gives a shower or vanity wall a warm Moroccan pattern. It mellows slowly into a softer gold with use and steam.
Details
- Material: solid brass
- Finish: polished unlacquered brass; develops a patina over time
- Design: pierced diamond lattice base and back panel with pointed peaks
- Draining open grid base, no side walls
- Mounting: wall mounted with screws through the back panel
- Suitable for showers, bathrooms and powder rooms
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Care and patina
Wipe with a soft damp cloth and dry it, especially in the shower. The brass is unlacquered, so it slowly darkens into a warm patina and water marks blend in over time. Use a brass polish if you want the bright look back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Will water collect on it?
No. The base is an open lattice, so water drains straight through.
What size is it?
The listing does not give exact measurements. Contact us and we will confirm the width, depth and height before you order.
How is it mounted?
It screws to the wall through the lattice back panel. Contact us to confirm which mounting hardware is included.
See all our brass bath accessories, and pair it with our handmade bathroom and vessel sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.