Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This brushed brass widespread bathroom faucet pairs a slim gooseneck spout with two separate handle risers, each standing on a stepped round base. The spout tip is cut at an angle and the short L-shaped levers sit on top of the cylindrical risers for a clean, modern look.
The brass is solid and cast, with a brushed matte finish that is left unlacquered, so it warms gently with use. The handle spacing is adjustable to suit different vanities. Choose lever or cross handles and the bundle you need.
Details
- Material: solid cast brass
- Finish: brushed unlacquered brass, delivered matte; develops a patina over time
- Style: modern widespread faucet with stepped round bases
- Mounting: deck mounted, 3 holes
- Handles: 2 handles, hot and cold; choose lever or cross (the lever is shown in most photos)
- Spout: fixed gooseneck with an angled tip, about 7 in tall with about 5 in reach (measured from a seller photo)
- Centres: adjustable handle spacing
- Bundles: top parts only, complete faucet, or complete faucet with a push-up drain
- Included: water supply lines and T-connectors
- Cartridges: standard 1/2 inch ceramic cartridges
- Connection: designed for 1/2 inch NPT plumbing
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Spout height | 7 in | 18 cm |
| Spout reach | 5 in | 13 cm |
| Handle spacing | Adjustable | Adjustable |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the faucet with a soft damp cloth and dry it after use. The brushed brass is unlacquered, so it slowly warms and darkens into a soft patina with use. A gentle brass polish restores the even satin tone, and you should avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Will it fit my sink or vanity?
It needs three deck holes and the handle spacing is adjustable. The spout reaches about 5 inches, so check it lands over your basin. Contact us for exact hole sizes.
Is the valve included?
The Complete Faucet bundles are the full faucet with supply lines and T-connectors. Top Parts Only is the visible spout and handles; contact us if you are unsure which you need.
Does it work with US plumbing?
The seller lists 1/2 inch NPT connections and standard 1/2 inch ceramic cartridges, compatible with US plumbing. A plumber should still confirm the fit.
See all our handmade brass faucets, and pair it with our handmade bathroom and vessel sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.