Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This engraved brass built-in bathroom faucet pairs deep Moroccan scroll engraving with two curved, ornate lever handles. The three round flanges and the L-shaped round spout are all hand-engraved, and the spout ends in a smooth brass band with an aerator.
Built into the wall above a vessel bowl or undermount basin, it reads as a decorative piece in a plain plaster or zellige wall. The spout reaches about 8.4 inches from the wall. The brass is unlacquered and delivered polished, so the engraved lines darken first as the patina develops.
Details
- Material: solid brass
- Finish: polished unlacquered brass with hand engraving; develops a patina over time
- Style: traditional Moroccan engraved wall mixer
- Mounting: wall mounted, built in; 3 wall holes (2 handles and 1 spout), valve holes about 1.1 in
- Handles: 2 handles, hot and cold, about 7.64 in apart; choose lever, simple cross or flat cross (ornate levers shown in the photos)
- Spout: engraved L-shaped spout with aerator, about 8.4 in reach; length can be customised
- Valve body: about 10 in wide, for a wall depth of about 1.54 to 2.49 in (from the seller drawing)
- Cartridges: standard ceramic cartridges
- Connection: listed as 1/2 inch NPT; the seller drawing shows G 1/2 threads, so ask your plumber to confirm
- Included: installation manual and the components needed for installation
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Spout reach from wall | 8.4 in | 21 cm |
| Spout drop | 3.7 in | 9.4 cm |
| Handle centres | 7.64 in | 19 cm |
| Flange diameter | 2.33 in | 5.9 cm |
| Valve body width | 10 in | 25 cm |
| Wall depth for valve | 1.54 to 2.49 in | 3.9 to 6.3 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the faucet with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it darkens gradually and the patina settles into the engraved lines. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Will it fit my sink or vanity?
It mounts in the wall, so the basin needs no tap holes. The spout reaches about 8.4 inches from the wall, with handles about 7.64 inches apart.
Is the valve included?
The listing says the components needed for installation are included, and the seller drawing shows the in-wall valve body. Contact us to confirm before your plumber sets the rough-in.
Can I have cross handles instead?
Yes. Choose simple cross or flat cross in the Handle option; the engraved spout and flanges stay the same.
See all our handmade brass faucets, and pair it with our handmade bathroom and vessel sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.