Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
A polished brass toilet paper holder with a flat backplate and a swing arm. A slim rectangular plate with rounded ends carries a pivot rod in two small knuckles, and from it a U-shaped rod arm drops down and runs back as an open bar for the roll.
The arm pivots on the rod, so it swings out to change the roll and hangs neatly against the wall when not in use. Made to order from solid unlacquered brass, it develops a warm patina with time.
Details
- Material: solid brass
- Finish: polished, unlacquered; develops a natural patina
- Style: flat rectangular backplate with a pivoting U-shaped swing arm
- Capacity: one standard roll
- Mounting: wall mounted, two screws through the ends of the backplate
- Included: 1 holder with mounting hardware
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Backplate width | 8 in | 20 cm |
| Arm drop | 4 in | 10 cm |
| Roll arm length | 7 in | 18 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe with a soft dry cloth. Unlacquered brass is a living metal: polish it with a brass polish to keep it bright, or let it deepen to a warm, aged patina. Avoid harsh cleaners and abrasive pads. See our Care and Patina Guide for the full routine.
Frequently asked questions
How does the swing arm work?
The arm turns on a rod held in two knuckles on the backplate. Swing it out, slide the roll on from the open end and let it drop back.
Will a standard roll fit?
Yes, the 7 inch arm takes one standard roll. For extra large rolls, contact us before ordering.
How is it mounted?
Two screws pass through the rounded ends of the 8 inch plate into the wall. Mounting hardware is included.
See all our brass bath accessories, and pair it with our handmade bathroom and vessel sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.