Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
A polished brass wavy toilet paper holder shaped from one continuous solid brass rod. Three soft waves run along the top from the wall fixing, then the rod sweeps down in a wide loop and returns as an open straight arm that carries the roll.
It is a playful, sculptural piece for a powder room or a bright family bathroom, and it doubles as a hand towel hanger. The brass is polished and will develop a warm patina over time.
Details
- Material: solid brass
- Finish: polished brass; develops a natural patina
- Style: single bent rod with a three-wave top, wide loop and open roll arm
- Capacity: one standard roll
- Mounting: wall mounted with screws at the fixing points of the rod
- Included: 1 holder with mounting hardware
- Contact us for exact measurements
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Care and patina
Wipe with a soft dry cloth. Raw brass is a living metal: polish it with a brass polish to keep it bright, or let it deepen to a warm, aged patina. Avoid harsh cleaners and abrasive pads. See our Care and Patina Guide for the full routine.
Frequently asked questions
How do I change the roll?
The bottom arm is open at one end, so the roll slides straight on and off.
Can I use it as a towel holder?
Yes. The open arm also holds a small hand towel or kitchen towel.
Does it come with screws?
Yes, the mounting hardware is included.
See all our brass bath accessories, and pair it with our handmade bathroom and vessel sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.