Polished Unlacquered Brass Glass Rinser, Deck Mount

Polished brass glass rinser with black spoked grid on a plain light background

Polished Unlacquered Brass Glass Rinser, Deck Mount

$122

Made for you in Fes

Hand-hammered after you order: 2 weeks in the workshop, then 5–8 business days to you.

Final sale once hammering starts, unless it arrives damaged or not as described. Cancel free within 48 hours. Unsure about fit? Send us your measurements and we will check before you order.

Ships to the contiguous US. Shipping is calculated at checkout. Shipping Returns

Handmade in FesHammered by Moroccan artisans

Talk to a person+1 762-920-7992

Bespoke sizesMade to your measurements

Secure checkoutEncrypted payment

A glass rinser in solid, unlacquered brass for the kitchen or bar sink: a round polished brass cup about 5 inches across with a curved open lip on one side, holding a black spoked wheel grid with a small spray nozzle in the centre. It is made for rinsing glasses, cups and bottles upside down right at the sink.

Set at the edge of the basin, the open lip lets water run straight back into the sink. The brass body is left raw, so it slowly ages to a warm patina beside a brass faucet.

Details

Material: solid brass body
Finish: polished, unlacquered; develops a natural patina
Style: round cup with an open drain lip and a black spoked rinsing grid
Included: 1 glass rinser, 1 rubber washer, 1 lock nut and 1 flexible hose
Installation: deck mounted through a hole at the edge of the sink or counter and secured from below with the lock nut
Fit: hole size and water connection thread are not listed yet, so please contact us before ordering
Free shipping
Handcrafted in Morocco
Each piece is unique; measurements are approximate

Dimensions

Measurement	Inches	cm
Overall width, with lip	5.42 in	14 cm
Cup diameter	5 in	13 cm
Height above counter	1.68 in	4.3 cm
Threaded stud length	1.06 in	2.7 cm

Measurements are approximate because each piece is made by hand.

Care and patina

Wipe the brass with a soft damp cloth and dry it after use. Unlacquered brass is a living metal: polish it with a brass polish to keep it bright, or let it mellow to a warm, soft patina over time. Avoid harsh cleaners and abrasive pads. See our Care and Patina Guide for the full routine.

Frequently asked questions

What is included?
The brass glass rinser, a rubber washer, a lock nut and a flexible hose.

How is it installed?
It mounts through a hole at the edge of the sink so the open lip drains into the basin, and is held from below with the lock nut. Contact us to confirm the hole size and water connection before ordering.

Does unlacquered brass change colour?
Yes. It starts bright and slowly darkens to a warm patina with use. A brass polish brings back the shine whenever you like.

See all our sink accessories, and pair it with our handmade brass sinks.

Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.

Farmhouse sinks: check the base cabinet width and the front apron height before you order.
Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
Bar and prep sinks: undermount and drop in installation are both possible.

Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.

Not sure it will fit? Send us your measurements and we will confirm before you order.

Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.

Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.

In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.

Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.

Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.

Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.

Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.

Kind words