Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This unlacquered brass concealed wall mount bathroom faucet shows only three neat pieces on the wall: a four-arm cross handle on a round flange at each side, and a long round spout in the middle that runs out from the wall and angles down to an aerator tip. The in-wall valve is included, so there is no visible pipework.
With about 10.5 inches of spout and 7.5 inch handle centres, it reaches well over vessel, undermount or wall-hung basins. The spout can be made to a custom length on request. The polished brass has no lacquer and develops a warm patina with time.
Details
- Material: solid brass
- Finish: polished unlacquered brass; develops a patina over time
- Style: concealed 3-piece wall mixer
- Mounting: wall mounted, concealed; 3 wall holes (2 handles and 1 spout), about 1.1 in for the valves and 0.9 in for the spout
- Handles: 2 four-arm cross handles with ball tips, hot and cold, 7.5 in centres
- Spout: angled round spout with aerator, about 10.5 in long; length can be customised
- Valve: concealed valve included (about 9.2 in wide)
- Cartridges: standard ceramic cartridges
- Connection: listed as 1/2 inch NPT; the seller drawing shows 1/2 inch BSP threads, so ask your plumber to confirm
- Included: valve, 3 trims, spout and the components needed for installation
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Spout length from wall | 10.5 in | 27 cm |
| Spout drop | 4 in | 10 cm |
| Handle centres | 7.5 in | 19 cm |
| Flange diameter (handles / spout) | 2.66 / 2.55 in | 6.8 / 6.5 cm |
| Valve body width | 9.2 in | 23 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the faucet with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it darkens gradually and builds a warm patina where it is touched most. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Will it fit my sink or vanity?
The faucet sits in the wall above the basin, so the basin needs no tap holes. The spout reaches about 10.5 inches from the wall, which suits most vessel and vanity basins.
Is the valve included?
Yes. The concealed in-wall valve comes with the faucet, along with the trims and spout.
Does it work with US plumbing?
The listing states 1/2 inch NPT, while the seller drawing shows 1/2 inch BSP threads. Ask your plumber to confirm the connection, or contact us.
See all our handmade brass faucets, and pair it with our handmade bathroom and vessel sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.