Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This unlacquered brass single handle concealed wall mixer shows only two clean trims: a round tube spout on a flat round plate that curves gently down to an aerator, and a larger round plate with a short cylindrical mixer body and one slim lever pointing down. The surfaces are smooth and polished.
One lever controls hot and cold water and the flow, which keeps a vessel bowl or undermount basin simple to use. It is the polished unlacquered version of our aged brass recessed mixer, and it will mellow to a warm patina over time.
Details
- Material: solid brass
- Finish: polished unlacquered brass; develops a patina over time
- Style: minimal concealed wall mixer
- Mounting: wall mounted, concealed; 2 wall holes (spout about 0.9 in, handle about 1.67 in)
- Handle: 1 single lever for hot and cold water and flow
- Spout: curved spout with aerator, reach about 8.45 in (read from the seller drawing); length can be customised
- Centres: about 5.2 in between spout and handle
- Plates: spout plate about 3.12 in, handle plate about 3.88 in across
- Connection: designed for 1/2 inch NPT
- Included: installation manual and the components needed for installation
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Spout reach from wall (about) | 8.45 in | 21 cm |
| Spout to handle centres | 5.2 in | 13 cm |
| Spout plate diameter | 3.12 in | 7.9 cm |
| Handle plate diameter | 3.88 in | 9.9 cm |
| Wall holes: spout / handle | 0.9 / 1.67 in | 2.3 / 4.2 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the mixer with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it darkens gradually and builds a warm patina where it is touched most. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Is it hot and cold?
Yes. The single lever mixes hot and cold water and controls the flow.
Will it fit my sink or vanity?
It mounts in the wall, so the basin needs no tap holes. Plan about 5.2 inches between the spout and handle holes; contact us to confirm the spout reach for your basin.
Is the valve included?
The listing says the components needed for installation are included, but it does not itemise the valve. Contact us to confirm before your plumber sets the rough-in.
See all our handmade brass faucets, and pair it with our handmade bathroom and vessel sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.