Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
An unlacquered brass wall mount kitchen faucet with two ornate cross handles and a swiveling spout that drops from the centre of the body, runs forward and turns down to the outlet. Two round wall flanges about 6 inches apart hold it to the wall, leaving the counter free.
The spout reaches about 8.5 inches over the sink, which suits a farmhouse, scullery or utility sink. The brass arrives bright and polished and gently darkens into a warm patina over time.
Details
- Material: solid brass
- Finish: polished unlacquered brass; develops a patina over time
- Style: traditional two handle wall mixer
- Mounting: wall mounted, 2 wall inlets with round flanges at 5.92 inch (about 6 inch) centres
- Handles: 2 ornate cross handles with ball ends, one for hot and one for cold
- Spout: swiveling S shaped spout with a spout reach of about 8.5 in
- Cartridges: standard 1/2 inch ceramic cartridges
- Included: faucet and installation manual
- Connections: the listing says designed for 1/2 inch NPT plumbing; the technical drawing marks 1/2 BSP wall inlets, so please contact us to confirm before installation
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Inlet centres | 5.92 in | 15 cm |
| Handle to wall | 4.15 in | 11 cm |
| Wall to spout outlet | 10.00 in | 25 cm |
| Spout reach | 8.50 in | 22 cm |
| Wall flange diameter | 2.66 in | 6.8 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the faucet with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it slowly darkens and builds a warm patina, heaviest where it is touched most. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Will it fit my wall?
It needs two supply inlets in the wall about 6 inches (5.92 in) apart, centre to centre.
Does it work with US plumbing?
It uses standard 1/2 inch ceramic cartridges. Please contact us to confirm the wall inlet thread for your supply lines before installation.
Is it hot and cold?
Yes. It has two handles, one for the hot supply and one for the cold supply.
See all our handmade brass faucets, and pair it with our handmade kitchen sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.