Unlacquered brass wall tub filler spout with hammered star backplate on a light background

Unlacquered Brass Wall Mount Tub Filler Spout with Star Backplate

Unlacquered Brass / 12 in
$123
Skip to product information
Unlacquered brass wall tub filler spout with hammered star backplate on a light background

Unlacquered Brass Wall Mount Tub Filler Spout with Star Backplate

$123
Finish
Length

View store information

Unlacquered Brass Wall Mount Tub Filler Spout with Star Backplate

Unlacquered Brass / 12 in

Made for you in Fes

Hand-hammered after you order: 2 weeks in the workshop, then 5–8 business days to you.

30-day returns on standard sizes. Custom sizes are final sale once hammering starts, unless they arrive damaged or not as described. You can cancel any order within 48 hours. Unsure about fit? Send us your measurements and we will check before you order.

Handmade in FesBy Moroccan artisans

Talk to a person+1 762-920-7992

Bespoke sizesMade to your measurements

Secure checkoutEncrypted payment

Before you order

The details

Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.

Overview

This unlacquered brass wall mount tub filler spout is a long, straight round brass tube that leaves the wall through a flat eight-point star backplate. The star has a softly hand-hammered surface, and the open end of the tube is cut at an angle so water falls in a clean stream.

Mount it on the wall above a freestanding or built-in tub, or use it as a spout over a basin, plunge pool or garden fountain, since the seller describes it for indoor and outdoor use. It is a spout only, so it is run from a separate valve. The polished brass is unlacquered and will deepen to a warm patina.

Details

  • Material: solid brass
  • Finish: polished unlacquered brass (brushed brass also offered); develops a patina
  • Style: Moroccan star backplate, hand-hammered
  • Spout: straight round tube, about 3/4 inch diameter, angled open outlet
  • Spout length options: 12, 16, 20 or 24 inches
  • Backplate: eight-point star, about 6 inches across
  • Mounting: wall mounted spout
  • Connection: 1/2 inch NPT male thread
  • Included: 1 spout and 1 star backplate
  • Not included: valve and rough-in plumbing
  • Installation by a licensed plumber is recommended
  • Free shipping
  • Handcrafted in Morocco
  • Each piece is unique; measurements are approximate

Dimensions

Measurement Inches cm
Spout length 12 / 16 / 20 / 24 30 / 41 / 51 / 61
Star backplate, about 6 15
Spout tube diameter 3/4 1.9

Measurements are approximate because each piece is made by hand.

Care and patina

Wipe the brass with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it darkens gradually and builds a warm patina where it is touched most. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.

Frequently asked questions

Is the valve included?
No. This is the spout and star backplate only. It needs a separate wall valve or mixer, which your plumber can supply.

Does it work with US plumbing?
The listing states a standard 1/2 inch NPT male connection. Ask your plumber to confirm for your installation, or contact us.

Which spout length should I choose?
Pick the length that reaches past the tub rim or basin edge from your wall. If you are unsure, contact us with your measurements.

See all our handmade brass faucets.

Size and install guide

Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.

  • Farmhouse sinks: check the base cabinet width and the front apron height before you order.
  • Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
  • Bar and prep sinks: undermount and drop in installation are both possible.

Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.

Not sure it will fit? Send us your measurements and we will confirm before you order.

Craftsmanship

Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.

Materials and care

Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.

Shipping and returns

In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.

Frequently asked questions

Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.

Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.

Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.

Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.

Loved in kitchens and bathrooms

Real reviews from buyers of our hand-hammered brass and copper pieces, across every platform we sell on.

More from the workshop