Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This unlacquered brass wall mount tub filler is a three-piece built-in set: two four-arm flat cross handles on round flanges and a centre round tube spout that sweeps out from the wall in a long, smooth curve to an open, slanted outlet. The polished surfaces are plain and simple.
Mounted on the wall at the end of a freestanding or built-in bathtub, it fills the tub without any deck holes. The seller also shows it above a vessel basin, so it can double as a wall faucet. Order it with or without the rough-in valve. The brass is unlacquered and develops a warm patina over time.
Details
- Material: solid brass
- Finish: polished unlacquered brass; develops a patina over time
- Style: built-in wall tub filler
- Mounting: wall mounted, built in; 3 wall holes (2 handles and 1 spout)
- Handles: 2 handles, hot and cold; choose simple cross, flat cross or lever (flat cross shown in the photos)
- Spout: long curved spout with an open outlet; length can be customised
- Valve: available without valve, or with the rough-in valve
- Cartridges: standard ceramic cartridges
- Connection: designed for 1/2 inch NPT
- Included: installation manual and the components needed for installation
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Care and patina
Wipe the tub filler with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it darkens gradually and builds a warm patina where it is touched most. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Is the valve included?
Choose With Valve to get the rough-in valve. Without Valve is the visible trim set for a valve you already have; contact us to check compatibility.
How far does the spout reach?
The seller does not list the spout reach or handle centres. Contact us for exact measurements before your plumber sets the rough-in.
Does it work with US plumbing?
The listing states it is designed for 1/2 inch NPT. Ask your plumber to confirm, or contact us.
See all our handmade brass faucets.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.