Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This unlacquered brass wall mount vessel faucet is a three-piece set: two slim straight lever handles on flat round flanges and a round tube spout in the middle that runs out from the wall and bends down in a smooth arc to an aerator tip. Only the trims show, so the vanity top stays clear for a raised bowl.
With about 7.5 inches of reach and 8 inch handle centres, it suits a vessel basin on a wide vanity or a floating shelf. Order the faucet alone or bundled with a brass P-trap, with or without the rough-in valve. The polished brass is unlacquered and darkens to a soft patina with use.
Details
- Material: solid brass
- Finish: polished unlacquered brass; develops a patina over time
- Style: minimal built-in wall mixer for vessel sinks
- Mounting: wall mounted, built in; 3 wall holes (2 handles and 1 spout), valve holes about 1.2 in
- Handles: 2 slim straight lever handles, hot and cold, 8 in centres
- Spout: curved spout with aerator, about 7.5 in reach; length can be customised
- Bundle options: faucet only, or faucet with a brass P-trap
- Valve: available without valve, or with the rough-in valve (wall depth about 2.6 to 3.3 in)
- Cartridges: standard ceramic cartridges
- Connection: listed as 1/2 inch NPT; the seller drawing shows G 1/2 threads, so ask your plumber to confirm
- Included: installation manual and the components needed for installation
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Spout reach from wall | 7.54 in | 19 cm |
| Spout drop | 4.28 in | 11 cm |
| Handle centres | 8 in | 20 cm |
| Overall width | 13.2 in | 34 cm |
| Flange diameter | 2.36 in | 6.0 cm |
| Wall depth for valve | 2.6 to 3.3 in | 6.6 to 8.4 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the faucet with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it darkens gradually and builds a warm patina where it is touched most. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Will it fit my sink or vanity?
It mounts in the wall above the basin, so the vessel or vanity needs no tap holes. The spout reaches about 7.5 inches from the wall; set it so the outlet lands over the centre of your bowl.
Is the valve included?
Choose With Valve to get the rough-in valve. Without Valve is the visible trim set for a valve you already have; contact us to check compatibility.
Is it hot and cold?
Yes. One lever controls hot and the other cold, and they mix in the single spout.
See all our handmade brass faucets, and pair it with our handmade bathroom and vessel sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.