Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This brushed brass cold water dispenser faucet is built from clean, simple shapes: a round deck flange, a tall straight column with a cross handle on top, and a round L spout that runs out from the column and turns down to a short outlet. The brushed finish has a soft satin sheen.
Standing about 11 inches tall with a 6 inch reach, it suits a prep sink, bar sink or a drinking water tap beside your main kitchen faucet. The matte texture helps hide fingerprints and water spots, and the brass slowly develops a gentle patina over time.
Details
- Material: solid brass
- Finish: brushed brass; develops a patina over time
- Style: minimal column tap with an L shaped spout
- Mounting: deck mount, single hole
- Handle: 1 handle on top; choose simple, flat, lever or nova style
- Spout: fixed L shaped spout, about 6 in reach
- Water: sold as a cold water tap; contact us before using it on a hot supply
- Connection: 1/2 inch faucet thread
- Size: about 11 in tall overall
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Overall height | 11 in | 28 cm |
| Spout reach | 6 in | 15 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the faucet with a soft damp cloth and dry it after use. Brushed brass is not lacquered, so it reacts with water and hands and builds a soft patina over time. Avoid harsh cleaners and abrasive pads; a gentle brass polish can freshen it, worked along the brushed grain. See our Care and Patina Guide.
Frequently asked questions
Will it fit my sink?
It mounts through one deck hole and reaches about 6 inches over the sink. Contact us with your hole size to confirm the fit.
Is it hot and cold or cold water only?
It is sold as a cold water tap with a single handle. Contact us if you plan to connect it to hot water.
Does it work with US plumbing?
It has a 1/2 inch faucet thread. Contact us if you would like us to confirm the fit with your supply line.
See all our handmade brass faucets, and pair it with our handmade kitchen sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.