Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
An unlacquered brass bridge kitchen faucet with a tall gooseneck spout and two curved lever handles. The legs stand on round deck flanges, a straight bridge pipe joins them, and the spout reaches 7.7 inches over the sink from a height of about 11.7 inches at the outlet.
It arrives bright and polished and slowly warms into a softer patina with daily use. Choose 6 or 8 inch centres, and add a strainer, side sprayer or matching cold water faucet for a complete look.
Details
- Material: solid brass
- Finish: polished unlacquered brass; develops a patina over time
- Mounting: deck mounted, 2 holes (pre drilled holes about 0.9 in / 23 mm)
- Handles: 2 curved lever handles, one for hot and one for cold
- Spout: high gooseneck spout with a swiveling neck
- Spout reach 7.70 in; outlet height 11.68 in; overall height 17.54 in (8 inch model)
- Centres: 6 inch (Regular) or 8 inch (King)
- Cartridges: standard 1/2 inch ceramic cartridges
- Included: faucet and installation manual
- Bundle options: faucet only, or with a brass sink strainer, a matching side sprayer, a matching cold water faucet, strainer and sprayer together, or the complete set (contact us for the exact pieces in the complete set)
- Connections: designed for 1/2 inch NPT plumbing
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Spout outlet height | 11.68 in | 30 cm |
| Spout reach | 7.70 in | 20 cm |
| Overall height | 17.54 in | 45 cm |
| Centres | 6 or 8 in | 15 or 20 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the faucet with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it slowly darkens and builds a warm patina, heaviest where it is touched most. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Will it fit my sink?
It needs two holes about 0.9 inch wide in the sink deck or counter, 6 or 8 inches apart depending on the size you choose.
Does it work with US plumbing?
It is designed for 1/2 inch NPT connections and uses standard 1/2 inch ceramic cartridges, which can be replaced from local US stores. A plumber should confirm the fit for your supply lines.
Is it hot and cold?
Yes. It has two handles, one for the hot supply and one for the cold supply.
See all our handmade brass faucets, and pair it with our handmade kitchen sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.