Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This unlacquered brass mini wall mount bathroom faucet is a compact 3-hole basin mixer: two slim straight lever handles on small round flanges, with a short curved spout between them that sweeps down to an aerator tip. Only the three trims show on the wall.
At about 8 inches wide and 4 inches tall, it suits powder rooms, small vessel basins and narrow vanities where a deck faucet would crowd the counter. Order it with or without the rough-in valve. The polished brass is unlacquered and will gain a soft patina in use.
Details
- Material: solid brass
- Finish: polished unlacquered brass; develops a patina over time
- Style: minimal built-in wall mixer
- Mounting: wall mounted, built in; 3 holes (2 handles and 1 spout)
- Handles: 2 slim straight lever handles, hot and cold
- Spout: short curved spout with aerator; length can be customised
- Valve: available without valve, or with the rough-in valve
- Cartridges: standard ceramic cartridges
- Connection: designed for 1/2 inch NPT
- Included: installation manual and the components needed for installation
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Overall width | 8 in | 20 cm |
| Overall height | 4 in | 10 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the faucet with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it darkens gradually and builds a warm patina where it is touched most. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Will it fit my sink or vanity?
It mounts in the wall above the basin and is about 8 inches wide, so the basin needs no tap holes. Contact us for the spout reach before you set the rough-in height.
Is the valve included?
Choose With Valve to get the rough-in valve. The Without Valve option is the visible trim set for a valve you already have; contact us to check compatibility.
Does it work with US plumbing?
The listing states it is designed for 1/2 inch NPT. Ask your plumber to confirm, or contact us.
See all our handmade brass faucets, and pair it with our handmade bathroom and vessel sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.