Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This unlacquered brass single lever bathroom faucet pairs a plain round body with one slim side lever and a round J-shaped spout that swivels. The outlet carries an aerator, and the clean lines suit modern vanities as well as warmer, traditional bathrooms.
It stands about 11 inches tall with roughly 6.5 inches of reach, enough to clear a vessel bowl or reach the middle of an undermount basin. The polished brass has no lacquer, so it slowly mellows to a soft, darker patina with daily use.
Details
- Material: solid brass
- Finish: polished unlacquered brass; develops a patina over time
- Style: minimal single lever basin mixer
- Mounting: deck mounted, single hole; base about 1.65 in wide
- Handle: 1 slim lever on the side of the body
- Water: hot and cold, mixed with the single lever
- Spout: swivel J-shaped spout with aerator, about 6.5 in reach
- Connection: designed for 3/8 inch NPT plumbing
- Included: faucet, 2 flexible supply lines, mounting ring, small wrench and installation manual
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Overall height | 11 in | 28 cm |
| Spout reach | 6.5 in | 17 cm |
| Base width | 1.65 in | 4.2 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the faucet with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it darkens gradually and builds a warm patina where it is touched most. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Will it fit my sink or vanity?
It mounts through a single deck hole. With about 11 inches of height and 6.5 inches of reach, it suits vessel basins and standard vanity sinks. Contact us with your hole size if you are unsure.
Is it hot and cold?
Yes. It connects to both hot and cold supplies, and the single lever mixes them in the spout.
Does it work with US plumbing?
The listing states it is designed for 3/8 inch NPT plumbing and includes flexible supply lines. Ask your plumber to confirm the fit, or contact us.
See all our handmade brass faucets, and pair it with our handmade bathroom and vessel sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.