Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This unlacquered brass wall mount bridge bathroom faucet has two round domed wall flanges joined by a straight brass bridge, with a four-arm cross handle on each side. From the middle of the bridge, a round spout runs forward and turns down in a clean L shape over the basin.
The inlets sit 6 inches apart, a spacing that can line up with existing wall connections. It suits undermount, vessel and wall-hung basins where you want a clear deck. The valves are included. The polished brass is unlacquered, so it gains a warm, lived-in patina over time.
Details
- Material: solid brass
- Finish: polished unlacquered brass; develops a patina over time
- Style: traditional exposed wall bridge mixer
- Mounting: wall mounted, 2 wall inlets
- Centres: 6 inch spread between the wall inlets
- Handles: 2 cross handles, hot and cold; choose simple cross or flat cross
- Spout: L-shaped spout from the centre of the bridge; length can be customised on request
- Cartridges: standard ceramic cartridges
- Connection: designed for 1/2 inch NPT
- Included: valves and the components needed for installation
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Centres, inlet to inlet | 6 in | 15 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the faucet with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it darkens gradually and builds a warm patina where it is touched most. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Will it fit my sink or vanity?
It mounts on the wall with two inlets 6 inches apart, so the basin needs no tap holes. Contact us for the spout reach and height before you plan the rough-in, or to ask for a custom spout length.
Is the valve included?
Yes. The valves come with the faucet, along with the components needed for installation.
Does it work with US plumbing?
The listing states it is designed for 1/2 inch NPT connections. Ask your plumber to confirm, or contact us.
See all our handmade brass faucets, and pair it with our handmade bathroom and vessel sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.