Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This unlacquered brass wall mount pot filler is a compact tap for the wall above your range. A short valve body comes out of a round wall flange with a single handle at the front, and a round spout rises from it, turns in a squared arch and drops to a short aerator outlet.
The spout swivels so you can swing it over a stock pot and push it back against the wall when you are done. It projects about 9.5 inches from the wall, small enough for a narrow backsplash, and the raw polished brass mellows into a warm patina near the heat of the stove.
Details
- Material: solid brass
- Finish: polished unlacquered brass; develops a patina over time
- Style: compact wall tap with a squared swivel spout
- Mounting: wall mounted, 1 wall inlet with a round flange about 2.55 in across
- Handle: 1 handle; choose simple cross, flat cross or lever
- Spout: swiveling squared spout with an aerator, about 7.5 in between risers and 9.54 in from wall to outlet
- Cartridge: standard 1/2 inch ceramic cartridge
- Connection: the listing says designed for 1/2 inch NPT plumbing; the technical drawing marks a 1/2 BSP inlet, so please contact us to confirm before installation
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Overall height | 5.94 in | 15 cm |
| Spout reach between risers | 7.50 in | 19 cm |
| Wall to spout outlet | 9.54 in | 24 cm |
| Wall to handle | 4.41 in | 11 cm |
| Wall flange diameter | 2.55 in | 6.5 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the pot filler with a soft damp cloth and dry it after cooking. Unlacquered brass reacts with water, steam and hands, so it darkens gradually and builds a warm patina. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Will it fit my wall?
It needs one water inlet in the wall above the range and projects about 9.5 inches. Contact us to confirm the inlet thread before installation.
Is it hot and cold or cold water only?
It has one handle on a single supply line, which is how pot fillers are usually plumbed (cold). Contact us if you want to connect it differently.
Does it fold?
No. The spout swivels side to side so you can swing it over a pot and back against the wall.
See all our handmade brass faucets, and pair it with our handmade kitchen sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.