Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
This unlacquered brass widespread bathroom faucet is a three-piece set: a tall round gooseneck spout on a flared base, flanked by two separate cross handles on matching flared bases. Each piece goes through its own hole, so you can space the handles to suit your vanity.
The brass is cast and left unlacquered. It is delivered polished and turns to a soft aged gold with use, as in the main photo. Choose cross or lever handles and the bundle you need: top parts only if you already have valves, the complete faucet, or the faucet with a push-up drain.
Details
- Material: solid cast brass
- Finish: unlacquered brass, delivered polished; ages to a soft patina
- Style: traditional widespread faucet with a gooseneck spout
- Mounting: deck mounted, 3 holes (about 1.2 in for each valve and 0.9 in for the spout per the technical drawing)
- Handles: 2 handles, hot and cold; choose four-arm cross or lever
- Spout: fixed gooseneck, about 8.47 in tall with about 5.8 in reach
- Centres: adjustable, recommended 8 to 10 inches between the handle holes
- Bundles: top parts only (spout and handles; a buyer review notes the valves are not included), complete faucet, or complete faucet with a push-up drain
- Cartridges: standard 1/2 inch ceramic cartridges
- Connection: the listing says designed for 1/2 inch NPT plumbing; the technical drawing marks a 1/2 BSP female T, so contact us to confirm
- Included: installation manual
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Spout height | 8.47 in | 22 cm |
| Spout reach | 5.8 in | 15 cm |
| Handle centres (adjustable) | 8 to 10 in | 20 to 25 cm |
| Handle base diameter | 2.55 in | 6.5 cm |
| Deck hole, valves | 1.2 in | 3.0 cm |
| Deck hole, spout | 0.9 in | 2.3 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the faucet with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it slowly darkens and builds a warm patina, heaviest where it is touched most. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Will it fit my sink or vanity?
It needs three deck holes, with the two handle holes about 8 to 10 inches apart. The spout reaches about 5.8 inches, so check it lands over your basin drain.
Is the valve included?
The Complete Faucet and Faucet + Push-Up Drain bundles are the full faucet. Top Parts Only is the spout and handles; a buyer review says valves were not included, so contact us if you are unsure.
Does it work with US plumbing?
The listing says it is designed for 1/2 inch NPT plumbing with standard 1/2 inch cartridges, but the drawing shows a 1/2 BSP T fitting. Contact us to confirm before installation.
See all our handmade brass faucets, and pair it with our handmade bathroom and vessel sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.