Before you order
The details
Sizing, care, craft and delivery, answered in one place. Still deciding? Ask the workshop.
Overview
An unlacquered brass widespread kitchen faucet in three separate pieces: a tall high arc gooseneck spout on a round flange and two cross handle valves that sit on either side. The handles have four arms with small ball ends, and the spout ends in a neat aerated outlet.
The spout stands 12 inches tall with an 8 inch reach and a 6.5 inch clearance under the outlet, and it swivels across the sink. Because the three pieces are separate, the handles can be spaced to suit your counter.
Details
- Material: solid brass
- Finish: polished unlacquered brass; develops a patina over time
- Style: classic widespread faucet with a high arc gooseneck spout
- Mounting: deck mounted, 3 holes
- Handles: 2 four arm cross handles with ball ends on separate valves, one for hot and one for cold
- Spout: high arc swivel spout; height 12.00 in, reach 8.00 in, outlet height 6.50 in
- Cartridges: standard 1/2 inch ceramic cartridges
- Included: spout, 2 handle valves and installation manual
- Connections: designed for 1/2 inch NPT plumbing
- Installation by a licensed plumber is recommended
- Free shipping
- Handcrafted in Morocco
- Each piece is unique; measurements are approximate
Dimensions
| Measurement | Inches | cm |
|---|---|---|
| Spout height | 12.00 in | 30 cm |
| Spout reach | 8.00 in | 20 cm |
| Spout outlet height | 6.50 in | 17 cm |
| Handle height | 2.48 in | 6.3 cm |
| Handle width | 2.76 in | 7.0 cm |
Measurements are approximate because each piece is made by hand.
Care and patina
Wipe the faucet with a soft damp cloth and dry it after use. Unlacquered brass reacts with water and hands, so it slowly darkens and builds a warm patina, heaviest where it is touched most. Use a brass polish whenever you want the bright finish back, and avoid harsh cleaners and abrasive pads. See our Care and Patina Guide.
Frequently asked questions
Will it fit my sink?
It needs three holes in the counter or sink deck: one for the spout and one for each handle. Contact us for the recommended spacing between the holes.
Does it work with US plumbing?
It is designed for 1/2 inch NPT connections and uses standard 1/2 inch ceramic cartridges, which can be replaced from local US stores. A plumber should confirm the fit for your supply lines.
Is it hot and cold?
Yes. It has two handles, one for the hot supply and one for the cold supply.
See all our handmade brass faucets, and pair it with our handmade kitchen sinks.
Size and install guide
Choosing a size. Each size is listed in the selector above. Measure the inside width and depth of your cabinet or counter cutout, and leave a little room around the sink for a clean fit.
- Farmhouse sinks: check the base cabinet width and the front apron height before you order.
- Vessel sinks: check the faucet height against the rim. A taller faucet or wall mount works best.
- Bar and prep sinks: undermount and drop in installation are both possible.
Installing. Copper and brass are softer than steel, so use a plumber who is comfortable with them. Seal the rim with a neutral cure silicone and avoid harsh solvents on the finish.
Not sure it will fit? Send us your measurements and we will confirm before you order.
Craftsmanship
Every sink is shaped and hammered by hand in our workshop in Fes, Morocco, a city where coppersmiths have worked the metal for centuries. Small variations in the hammer marks are what make each piece one of a kind.
Materials and care
Solid copper or brass, with a natural finish that deepens with use. Rinse after use, dry with a soft cloth, and wash with mild soap. Avoid bleach and abrasive pads. Read the full care guide.
Shipping and returns
In stock sizes ship from our New Jersey warehouse. Bespoke sinks are made to order, and we confirm timing with you before production. See our shipping policy and refund policy.
Frequently asked questions
Will the color change over time?
Yes. Copper and brass develop a living patina. It deepens and warms with use, and you can slow or polish it back.
Can you make a custom size?
Yes. Bespoke sinks are made to order in Fes to your measurements. Contact us with your dimensions.
Is a drain included?
The drain details are in each product description. If you are unsure, ask us before ordering.
Where does it ship from?
Some sizes are ready to ship from our New Jersey warehouse. The rest are hand-hammered to order in Fes and ship after 2 to 4 weeks in the workshop. The delivery note beside Add to cart shows which applies to this sink.